This shows you the differences between two versions of the page.

Link to this comparison view

i2c [2019/03/31 14:49] (current)
Line 1: Line 1:
 +======= I2C =======
 +The I2C bus was designed by Philips in the early ’80s to allow easy communication
 +between components which reside on the same circuit board. Philips Semiconductors
 +migrated to NXP in 2006.
 +The name I2C translates into “Inter IC”. Sometimes the bus is called IIC or I²C bus.
 +There are two wires, SDA and SCL. 
 +The first thing to realize: SDA and SCL are open-drain (also known as open-collector
 +in the TTL world), that is I2C master and slave devices can only drive these lines
 +low or leave them open
 +It has a 7 bit addressing scheme (along with a rarely used 10 bit scheme).
 +Transmissions are done in 8 byte bursts, which the first byte of the transmissing
 +being an address and a 1 bit read or write flag. 
 +Overview of Microchip'​s MSSP module
  • i2c.txt
  • Last modified: 2019/03/31 14:49
  • (external edit)