Differences

This shows you the differences between two versions of the page.

--- can [2019/01/09 19:52]
paul [Implementation]
+++ can [2019/03/31 14:49] (current)
@@ Line 1: / Line 1: @@
- ====== Controller Area Network ======
+====== Controller Area Network ======
 ===== Overview =====
@@ Line 29: / Line 29: @@
   * **Error Frame** - any node may signal an error condition at any time during a data or remote frame transmission
-{{ :can-bus-frame_in_base_format_without_stuffbits.svg |}}
+{{ ::can-bus-frame_in_base_format_without_stuffbits.png?direct&600 |}}
 The distance between frames is a minimum of 3 bit times.
@@ Line 75: / Line 75: @@
 ==== Implementation ====
-Here is a chip implementation from the Controller Area Network (CAN) Implementation Guide:(([[https://www.analog.com/media/en/technical-documentation/application-notes/AN-1123.pdf |Analog Devices]]))
+Here is a chip implementation:(([[https://www.analog.com/media/en/technical-documentation/application-notes/AN-1123.pdf |Analog Devices Controller Area Network (CAN) Implementation Guide]]))
 {{ :can_stuff.png?direct&400 |}}
+==== Notes ====
+ECAN is the "Enhanced Controller Area Network" module from Microchip. It's what they call they module that is compatible with everything up to CAN2.0B (which is the latest CAN standard up that includes the 29 bit extended identifier). (([[http://ww1.microchip.com/downloads/en/devicedoc/70226c.pdf|Microchip's ECAN module]]))